Zeit 42 Swiss
Zeit 42 swiss
Main Gang Slide has standard 3 fully programmable B-axis live tools, can work on main or sub spindle- additional 3 tools available.
Main spindle has interchangable guide bushing to non guide bushing machining- 20-30 minute change over. Back working block has standard 4 live and 4 static tool position, optional y-axis available on back working block. Thru feed parts capable- chip conveyor is lowered as a standard item, chip bin also supplied. Mechanical part cut-off detection standard. Many more possibilities to many to be listed.
Swiss Turn Zeit 42 Specifications
Working Range
Max Turning Diameter-42 mm (1 5/8")
Max Machining Length Per Chucking-268mm (10.55")
Max Drilling Diameter-20mm
Max Tapping Diameter-M16
OD Tooling (Slide 1)
Number of Tools-6
Dimension-16mm x 16mm x 120mm
ID Tooling (Slide 2)
Number of Tools-2
Dimension-13 mm (ER20)
ID Driven Tooling   (Slide 2)
Number of Tools-2
Dimension-13 mm (ER20)
Cross Working Driven Tooling (Slide 1)
Number of Tools-6
Dimension-13 mm (ER20)
Speed-6,000 RPM
360 degree Working Driven Tooling (Slide 1)
Number of Tools-3 (optional 3 additional, total of 6)
Dimension-13mm (ER20) (opt. ER11)
Speed-3,000 RPM
Backworking: Static Tools
Number of Tools-4
Live Tools
Number of Tools-3
Main Spindle
Spindle Hole Diameter-46 mm
Spindle Speed-6,000 RPM
Angular movement-Full C axis
Horsepower-7 HP
Back Working Spindle
Spindle Hole Diameter-33 mm
Spindle Speed-6,000 RPM
Max Length for front eject-250 mm
Angular movement-C-Axis
Horsepower-9.7 HP
Rapid Traverse
X1, Y1, Z1, X2, Y2, Z2
1181 IPM/709 IPM
Long Shaft System
Max.  internal diameter-38 (1.50”)